Autonomous UAV (unmanned aerial vehicle)Project. Report should include the following:

• Your report should be approximately 10-15 pages. 
• Include a minimum of 3 sources, including at least 1 non-Internet journal article. 
• In addition to your own research, you can use the Web resources found near the end of the textbook. 
• The purpose of the project should be described in detail. 
• The project scope should be clearly identified. 
• The technical and program risks associated with the project should be identified. 

Your report should contain the following:

• Title Page: The title page contains a title, the course number, your name, and the date. 
• Table of Contents 
• Introduction 
  • Proposed explanation based on evidence available 
  • Goals for which the paper is being written 
  • Explanation of why the research paper is being written 
  • Description of the experimental setup 
  • Thesis statement 
• Materials and Methods: The paper addresses the systems engineering (SE) concepts covered in this class. Appropriate analytical SE methods should be used, including the details of the process used in research. The procedure should be chronological and in a detailed manner that leads the readers to the results. 
• Results: The results are to be reported objectively. The obtained results are presented in a summary. Each result should be elaborated separately. Lengthy explanations should be avoided. 
• Discussion: This section discusses your analysis on the success and failure of the assumptions and whether the objectives were achieved. If the answer is negative, explain why the objectives were not achieved. Identify trade-offs and design alternatives. 
• References: The research paper should have a wide variety of sources, including non-Internet sources. All sources should be accurately documented in APA format. 
• Appendices: Graphs, charts, bar diagrams, and pictorial data should be included in the appendices. 
• Acknowledgments: Acknowledge help received from outside resources.